Modeling of dynamics, heat transfer, and combustion in two-phase turbulent flows: 2. Flows with heat transfer and combustion

The objective of this part of the paper is to summarize the information concerning the authors' works in the field of simulation of two-phase gas-particle turbulent flows with heat transfer and combustion. A kinetic equation had been derived for the probability density function (PDF) of the particle velocity, temperature, and mass distributions in turbulent flows. This PDF equation is used for the construction of the governing conservation equations of mass, momentum, and heat transfer in the dispersed particle phase.The numerical scheme incorporates two-phase fluid dynamics, convective and radiative heat transfer, and combustion. The proposed models have been applied to the calculation of various particle-laden turbulent flows in jets, combustion and gasification chambers, and furnaces.     

逆向环形分布射流迴流特性的数值计算

数值计算表明,逆向多环形分布射流可造成颗粒能直接进入,并能进行强烈的动量、能量交換的理想的迴流区结构。多环形结构可在大范围內造成所需尺寸的迴流区。逆向射流和主流速度比、环直径、射流直径和孔数、环的结构形式及离燃烧室进口的距离是影响迴流特性的主要参数。     

Die Herstellung von Aluminiumnitrid

Zur Erzeugung von Kohlenstoff-14 in Kernreaktoren nach der Gleichung N-14 (n, p) C-14 wird auf Grund vieler physikalischer Parameter, wie hohe Temperaturbeständigkeit, holier Stickstoffgehalt (bezogen auf die Masseeinheit) und geringerer Einfangsquerschnitt für Neutronen der metallischen Komponente sowie relativ leichte Abtrennung des gebildeten Kohlenstoffs Aluminiumnitrid eingesetzt. Die Amvendung des Aluminiumnitrids fur die angeführte Kernreaktion erfordert den Einsatz von reinsten Materialien, besonders den Ausschluß von Kohlenstoff und dessen Verbindungen. Aus diesem Grunde ist es nicht möglich, das in der Technik angewandte Verfahren, die Herstellung aus Bauxit, anzuwenden.     

基于耦合声场建模的膨胀腔消声器声学性能分析及试验

针对圆柱形膨胀腔消声器三维建模及声学性能分析问题, 提出一种基于切比雪夫变分原理的耦合声场建模方法, 建立三维圆柱形膨胀腔消声器理论模型并搭建试验台架, 传递损失试验结果验证了理论模型的准确性. 将膨胀腔消声器内部声场分解为多个子声场, 基于子声场间压力与质点振速连续性条件, 推导声场耦合变分公式, 构建子声场拉格朗日泛函. 将子声场声压函数展开为切比雪夫-傅里叶级数形式, 通过瑞利-里兹法求解膨胀腔消声器频率、声压响应及传递损失. 计算并对比分析扩张比、扩张腔长度、进出口管偏置对膨胀腔消声器消声性能的影响. 结果表明: 扩张比增大会有效提高消声器在低频段的消声性能, 进出口管的偏置对消声器消声性能影响很小.     

LC–MS/MS determination and interaction of the main components from the traditional Chinese drug pair Danshen–Sanqi based on rat intestinal absorption

The Chinese drug pair Danshen (Salvia miltiorrhiza)–Sanqi (Panax ginseng) has been widely used for centuries treating various cardiovascular disorders, among which salvianlic acid B (SAB), ginsenoside Rg₁ (GRg₁), ginsenoside Rb₁ (GRb₁) and notoginsenoside R₁ (NGR₁) were identified as the major components. The present study focused on the interaction between these components based on investigating their intestinal absorption using the Ussing chamber technique. The concentrations of SAB, GRg₁, GRb1 and NGR₁ in the intestinal perfusate were determined by LC–MS/MS method, followed by Q (accumulative quantity) and P_app (apparent permeability). The results showed that all these four main components displayed very low permeabilities, which implied their poor absorption in the rat intestine. The intestinal absorption level of SAB displayed regioselectivity: duodenum < jejunum < ileum. However, there was no significant difference in the absorption of GRg₁ and GRb₁ in the different segments. The Q and P_app values of the four main components were obviously increased in jejunum when co‐administrating Danshen extract with Sanqi extract. In conclusion, compatibility of Danshen and Sanqi could remarkably improve the intestinal absorption level of the main components in the pair. To some extent, this might explain the nature of the compatibility mechanisms of composite formulae in TCMs.     

Numerical study of unsteady flow and heat transfer of circular tangential direction jets flowing over the inner cylinder surface in the annular chamber

In order to understand the dynamics of vortices on heat transfer, the unsteady flow field of tangential direction jets flowing in the annular chamber is numerically investigated by scale-adaptive simulation (SAS). The jet Reynolds number is 332,000 based on the jet’s diameter and inflow velocity for a specific geometric model. The analogy theory is used to obtain the convective heat transfer coefficient distribution on the hub surface. Spectral analysis via fast Fourier transform (FFT) is used to analyze frequency information that flows inside the chamber. The proper orthogonal decomposition (POD) method is performed on the velocity field in the chamber and the convective heat transfer coefficient on the hub surface using a snapshot method. The fast Fourier transform helps find the dominant frequency of the unsteady flow in the chamber. The time sequence of velocity fields on the radial plane shows the presence of cyclic flapping of the jet. The proper orthogonal decomposition analysis indicates that the unsteady periodic flow phenomenon in the chamber and unsteady heat transfer on the hub surface are mainly related to the dynamics of the counter-rotating vortices caused by the jet.     

Adhesion behavior of endothelial progenitor cells to endothelial cells in simple shear flow

The adhesion of endothelial progenitor cells(EPCs) on endothelial cells(ECs) is one of the critical physiological processes for the regenesis of vascular vessels and the prevention of serious cardiovascular diseases.Here,the rolling and adhesion behavior of EPCs on ECs was studied numerically.A two-dimensional numerical model was developed based on the immersed boundary method for simulating the rolling and adhesion of cells in a channel flow.The binding force arising from the catch bond of a receptor and ligand pair was modeled with stochastic Monte Carlo method and Hookean spring model.The effect of tumor necrosis factor alpha(TNF-α) on the expression of the number of adhesion molecules in ECs was analyzed experimentally.A flow chamber system with CCD camera was set up to observe the top view of the rolling of EPCs on the substrate cultivated with ECs.Numerical results prove that the adhesion of EPC on ECs is closely related to membrane stiff-ness of the cell and shear rate of the flow.It also suggests that the adhesion force between EPC and EC by P-selectin glycoprotein ligand-1 only is not strong enough to bond the cell onto vessel walls unless contributions of other catch bond are considered.Experimental results demonstrate that TNF-α enhanced the expressions of VCAM,ICAM,P-selectin and E-selectin in ECs,which supports the numerical results that the rolling velocity of EPC on TNF-α treated EC substrate decreases obviously compared with its velocity on the untreated one.It is found that because the adhesion is affected by both the rolling velocity and the deformability of the cell,an optimal stiffness of EPC may exist at a given shear rate of flow for achieving maximum adhesion rates.     

利用252 Cf快裂变室测量BC501A液闪探测器的相对探测效率和响应函数

本文利用²⁵²Cf快裂变室和多参数数据采集系统,逐事例的同时记录了自发裂变中子和瞬发伽马的飞行时间(TOF),脉冲形状甄别(PSD)和反冲能量(RE,裂变中子是通过测量反冲质子;瞬发伽马是通过测量康普顿反冲电子)三维信息.详细介绍了通过离线数据分析完全扣除三维信息中的伽马事例贡献,以获得Φ50.8 mm×50.8 mm的BC501A液闪探测器的相对探测效率和响应函数的方法.在不通过探测器响应函数进行数据转换的条件下,利用中子的能量直接确定了中子的有效测量阈值.得到的中子 关键词： 252Cf快裂变室')" href="#">²⁵²Cf快裂变室 BC501A液闪探测器 相对探测效率 响应函数     

混响室的概率统计分析方法及其蒙特卡罗模拟

 提出了一种研究混响室问题的理论分析方法,从理想混响室的离散概率模型出发,采用蒙特卡罗模拟来获得室内电磁场量及其相关物理量的概率统计特性。运用该方法获得了混响室内若干场量（均为归一化值）的概率密度函数、室内一段均匀无耗单导体传输线的负载平均耦合截面及负载电流响应模值的概率分布,所得结果与已有文献给出的结果（包括由解析公式计算或测量所得的结果）吻合良好。由于蒙特卡罗方法的普适性,采用该方法可以获得任意待分析参量的全部概率统计特性（只要样本数足够大）。同时该方法无需针对具体混响室进行,只要在其测试区域能较好地与理想混响室的基本概率模型相吻合,就能给出较精确的计算结果,且其计算量远远小于基于全波分析的蒙特卡罗方法。     

有旋和无旋气固两相湍流的不同结构

了解有旋和无旋突扩气粒两相详细湍流结构对控制燃料-空气混合、火焰稳定以及燃烧污染物生成很重要.周力行等曾经对其中的两相时平均流场和湍流特性进行过雷诺平均的RANS模拟和测量的研究,但是BANS模拟不能给出详细的两相湍流的瞬态结构.本文建立了二阶矩两相亚网格尺度应力模型,对有旋和无旋同轴突扩气粒两相流动进行了双流体大涡模...